our Products

> About the Product

About the Product

Point Stainless steel Submersible Pumps are ingeniously designed and developed employing latest engineering softwares, high-tech machinery of pumping technology to deliver the best possible hydraulic efficiency . All these pumps are made of corrosion resistance Stainless steel with Non return valve. These pumps are made by High quality AISI 304 / AISI 316 grade stainless steel.

The 6” Stainless steel Submersible Pumps are made discharge range from 7m3/hr to 80m3/hr and Head range from 4.5m to 550m. The 6” Stainless steel Submersible Pumps are available with 2”, 2 ½”, 3” & 4” Outlet Size.

Point Stainless steel Submersible Pumps are used for Public water supply , Irrigation, Fountains, De-watering, Sprinkler systems, Industrial water supply and Pressure boosting systems.

Features of Point Stainless steel Submersible Pumps: Stainless steel impellers and diffusers to resist corrosion, Built in non-return valve to protect the pump against water hammer, highly efficient, good resistance to sand, Energy efficient hydraulic design for cost effective operation, Easy to install and dismantle for service in the field if necessary .

Pumped Liquids

Non-aggressive, non-explosive, pure, cold, fresh water without abrasives particles having the following characteristics.

1. Temperature - 91.40 F
2. Chlorine ion density - 500 ppm (max.)
3. Allowable solids 3000 ppm (max.)
4. Specific gravity 1.004 (max.)
5. Hardness (Drinking Water) 300 (max.)
6. Viscosity 1.75x10 m²/sec (max.)
7. Turbidity 50 ppm silica scale (max.)
8. pH 6.5 to 8.5


The technology of submersible pumps are multistage single suction centrifugal type and provided with integral check valve which can be coupled to a submersible electric motors. The submersible pumps are designed and manufactured to provide smooth and easy installation.

Point submersible pumps can be offered with either Point water filled submersible motors or other NEMA standard motors.

The pump is checked during each stage of the assembly process up to the final stage, where in every pump is checked for flow, pressure, power consumption and leaks.


The submersible pumps are available in stainless steel AISI 304 and AISI 316 grade in 6” submersible pumps.

Pump shaft – AISI 304 & AISI 431
Diffuser casing – AISI 304 / AISI 316
Impeller – AISI 304 / AISI 316


To make a positive impact in the pump efficiency level effective measures have been taken in designing every component. Superior manufacturing methods are adopted to achieve higher efficiencies.


The best material, high quality manufacturing methods and rigorous safety tests are conducted to ensure superior strength and durability of each product range.


Stainless steel pump Shafts are designed and made of AISI 304 / AISI 431 grade Stainless steel material.

Impeller / Diffuser

These pumps are made with SS impeller and Diffuser for high efficiency and less loss. Impellers and Diffusers are available with various material grades like AISI 304/AISI 316.

Non Return Value

The integral Non return valve prevents back flow and reduces the risk of water hammer which paves the way for trouble free performance. Non return valve available with various material grades like AISI 304 / AISI 316.

Wearing Ring / Intermediate Bush

The wearing Ring and Intermediate bush are made with high quality rubber like NBR which has less wear and tear resistance.


Point Submersible Motors are developed and manufactured user-freindly wet type Rewindable. Motor is Pre-filled with clear, cold, filtered water. Motors can also be customised if the requirements are not covered by the overview.

Point 6” Submersible Motors are available from 2.2kW to 37kW with NEMA Standards.

Material Options

The submersible motors are available in stainless steel AISI 304 grade in 6” submersible motors.

Motor shaft – AISI 431
Stator Shell – AISI 304 / AISI 316
Diaphgram – Nitrle Rubber


The stator windings are water proof poly wrapped copper winding wires.

Housing Shell

The Housing shells are made ast Iron with AISI 304 Grade Stainless steel Cover.

Thrust Bearing / Pad

Thrust Bearing and Pad made with SS 420 and graphite Carbon material is long life and increase the efficiency of the pump.


Diaphgram is provided to guard the pressure and volume variations of the water inside the motor. Diaphgram is made with Nitrle Rubber

Motor Base

Motor base is made with AISI 304 grade stainless steel.


  • Small Farms

  • Domestic Applications

  • Nurseries

  • Hotels

  • Industries

  • Gardens & Fountains

  • Agricultural Irrigation

  • Fire Fighting