Agriculture & Domestic

SS Submersible > 6" SS & CI Submersible Motor

Have Question?

Quality of Borewell Motors

These motors are made of stainless stell material, total ss 304 construction with SS 316 material as option. Point submersible motors designed in 4″ configuration, water filled and rewindable and easy to maintain.

Product Features
  • 6″ Submersible water filled and rewindable motor with insulated windings.
  • Complete SS 304 construction with optional SS 316
  • Radial, Axial thrust bearing and water thrust bearings are lubricated.
  • Shafts are induction hardened SS 431 material
  • Special winding design for high torque, low temperature rise, high efficiency
  • Motors are pre-filled with water and glycol mixture for longer life.
  • Diaphragm cup with suitable protection for pressure and volume variation inside motor.
6″ Specification
  • Ratings: three Phase – 4 to 45 KW
  • Supply Voltages (Tolerance +10%/-15%) 60HZ, 3 Phase, 230 V, 380 V, 460 V
  • Degree of Protection: IP 68
  • Continuous duty
  • Ambient temperature: 45 C
  • Rotation: Three Phase – CCW and CW
  • Maximum nos. of starts/hour: 4 to 22 KW – 20 18.5 to 45 KW – 15
  • Water pH: 6.5 – 8
  • Minimum cooling flow along the motor: 4 to 15 KW – 15cm/sec 18.5 to 45 KW – 30cm/sec
  • Motor Protection: Select thermal overload Protection with trip time
  • Maximum submerged depth: 250 meters
  • Mounting: Vertical/Horizontal (up to 30KW)
6″ On Request Mechanical shaft seal Sic/Sic Built in PT 100 Temperature sensor. Special Voltages. Double cable for Star – Delta operation

Technology

Point Submersible Motors are developed and manufactured user-freindly wet type Rewindable. Motor is Pre-filled with clear, cold, filtered water. Motors can also be customised if the requirements are not covered by the overview.

Point 4″ Submersible Motors are available from 0.37kW to 7.5kW with NEMA Standards.

Point 6″ Submersible Motors are available from 2.2kW to 37kW with NEMA Standards.


Material Option

he submersible motors are available in stainless steel AISI 304 grade in 4″ and 6″ submersible motors.

Motor shaft – AISI 431
Stator Shell – AISI 304 / AISI 316
Diaphgram – Nitrle Rubber


Stator

The stator windings are water proof poly wrapped copper winding wires.


Housing Shell

The Housing shells are made with AISI 304 Grade Stainless steel.


Thrust Bearing / Pad

Thrust Bearing and Pad made with SS 420 and graphite Carbon material is long life and increase the efficiency of the pump.


Diaphgram

Diaphgram is provided to guard the pressure and volume variations of the water inside the motor. Diaphgram is made with Nitrle Rubber


Motor Base

Motor base is made with AISI 304 grade stainless steel.

6″ Water Filled Stainless Steel Submersible Motor


4″ Water Filled Cast Iron Submersible Motor

4″ – Water Filled Stainless Steel Submersible Motor Performance Data

MOTOR TYPE PN Ka (N) Un (V) In Ist/In N (Min-1) η% Cos Ø Tn (Nm) L (MM) Gross Weight (Kg)
KW HP (A) 50% 75% 100% 50% 75% 100%
P6WS-40T 4 5.5 27500 380 10.10 4.12 2890 69.3 73.0 75.5 0.61 0.71 0.80 13.22 754 45
400 9.50 4.02 2910 70.8 74.3 76.0 0.60 0.72 0.80 13.13
415 9.50 4.12 2910 71.3 74.6 76.0 0.58 0.69 0.77 13.13
P6WS-55T 5.5 7.75 27500 380 13.6 4.12 2855 71.0 75.0 76.5 0.63 0.75 0.82 18.40 814 50
400 12.8 4.02 2870 72.8 76.3 77.5 0.61 0.73 0.81 18.31
415 12.7 4.12 2885 73.0 76.5 78.0 0.60 0.72 0.80 18.22
P6WS-75T 7.5 10 27500 380 18.0 5.20 2860 72.8 76.0 77.5 0.64 0.75 0.82 25.05 864 54
400 17.1 5.02 2870 74.0 77.3 78.5 0.62 0.74 0.81 24.97
415 16.6 4.94 2880 74.8 77.8 79.0 0.60 0.71 0.80 24.88
P6WS-93T 9.3 12.5 27500 380 21.7 5.22 2845 74.0 77.8 79.5 0.65 0.75 0.82 31.23 914 64
400 20.8 5.12 2860 76.3 79.3 80.5 0.62 0.74 0.80 31.07
415 20.4 5.02 2875 76.5 79.5 80.7 0.60 0.72 0.79 30.90
P4WS-110T 11 15 27500 380 25.1 5.24 2850 75.3 78.3 80.2 0.65 0.75 0.83 36.87 964 70
400 24.0 5.12 2870 76.8 80.3 81.5 0.62 0.74 0.82 36.62
415 23.8 5.30 2880 77.2 80.6 81.6 0.6 0.72 0.80 36.50
P6WS-130T 13 17.5 27500 380 29.5 5.00 2860 75.8 78.8 80.5 0.64 0.76 0.83 43.43 989 74
400 28.5 5.10 2880 77.3 80.3 81.5 0.61 0.75 0.81 43.12
415 28.4 5.20 2880 77.8 80.8 82.0 0.59 0.72 0.78 43.12
P6WS-150T 15 20 27500 380 33.2 5.20 2860 76.8 80.0 81.8 0.65 0.77 0.84 50.11 1014 80
400 31.6 5.10 2880 78.3 81.3 82.5 0.64 0.76 0.83 49.76
415 31.5 5.28 2880 78.8 81.8 83.0 0.60 0.73 0.80 49.76
P6WS-185T 18.5 25 27500 380 40.9 5.12 2860 77.3 80.3 81.9 0.66 0.78 0.84 61.80 1064 90
400 39.4 5.20 2880 78.4 81.4 82.5 0.64 0.77 0.82 61.37
415 39.5 5.25 2880 78.8 81.8 83.1 0.61 0.73 0.80 61.37
P6WS-220T 22 30 27500 380 46.5 5.10 2870 78.3 81.6 83.6 0.70 0.80 0.86 73.24 1114 95
400 44.6 5.20 2890 79.2 82.8 84.0 0.66 0.77 0.85 72.73
415 45.2 5.15 2900 79.7 83.0 84.3 0.62 0.75 0.83 72.48
P6WS-260T 26 35 27500 380 56.2 5.18 2870 78.7 81.8 83.6 0.70 0.79 0.86 86.56 1154 101
400 55.4 5.20 2890 79.3 82.8 84.0 0.65 0.77 0.84 85.96
415 5.15 2900 79.79 83.1 84.3 0.62 0.75 0.82 85.66
P6WS-300T 30 40 27500 380 63.2 5.22 2890 78.9 82.8 84.5 0.71 0.80 0.87 99.18 1194 117
400 62.4 5.30 2900 80.1 83.8 85.0 0.65 0.79 0.86 98.84
415 63.8 5.32 2900 81.2 84.3 85.6 0.63 0.75 0.83 98.84
P6WS-370T 37 50 27500 380 78.5 5.53 2890 79.7 82.8 84.2 0.71 0.80 0.87 123.18 1224 128
400 77.4 5.30 2900 80.2 83.8 85.0 0.66 0.79 0.86 121.90
415 79.0 5.32 2900 81.2 84.0 85.2 0.63 0.75 0.84 121.90
 

4″ – Water Filled Cast Iron Submersible Motor Performance Data

MOTOR TYPE PN Ka (N) Un (V) In Ist/In N (Min-1) η% Cos Ø Tn (Nm) L (MM) Gross Weight (Kg)
KW HP (A) 50% 75% 100% 50% 75% 100%
P6WC-40T 4 5.5 27500 380 10.10 4.12 2890 69.3 73.0 75.5 0.61 0.71 0.80 13.22 754 45
400 9.50 4.02 2910 70.8 74.3 76.0 0.60 0.72 0.80 13.13
415 9.50 4.12 2910 71.3 74.6 76.0 0.58 0.69 0.77 13.13
P6WC-55T 5.5 7.75 27500 380 13.6 4.12 2855 71.0 75.0 76.5 0.63 0.75 0.82 18.40 814 50
400 12.8 4.02 2870 72.8 76.3 77.5 0.61 0.73 0.81 18.31
415 12.7 4.12 2885 73.0 76.5 78.0 0.60 0.72 0.80 18.22
P6WC-75T 7.5 10 27500 380 18.0 5.20 2860 72.8 76.0 77.5 0.64 0.75 0.82 25.05 864 54
400 17.1 5.02 2870 74.0 77.3 78.5 0.62 0.74 0.81 24.97
415 16.6 4.94 2880 74.8 77.8 79.0 0.60 0.71 0.80 24.88
P6WC-93T 9.3 12.5 27500 380 21.7 5.22 2845 74.0 77.8 79.5 0.65 0.75 0.82 31.23 914 64
400 20.8 5.12 2860 76.3 79.3 80.5 0.62 0.74 0.80 31.07
415 20.4 5.02 2875 76.5 79.5 80.7 0.60 0.72 0.79 30.90
P4WC-110T 11 15 27500 380 25.1 5.24 2850 75.3 78.3 80.2 0.65 0.75 0.83 36.87 964 70
400 24.0 5.12 2870 76.8 80.3 81.5 0.62 0.74 0.82 36.62
415 23.8 5.30 2880 77.2 80.6 81.6 0.6 0.72 0.80 36.50
P6WC-130T 13 17.5 27500 380 29.5 5.00 2860 75.8 78.8 80.5 0.64 0.76 0.83 43.43 989 74
400 28.5 5.10 2880 77.3 80.3 81.5 0.61 0.75 0.81 43.12
415 28.4 5.20 2880 77.8 80.8 82.0 0.59 0.72 0.78 43.12
P6WC-150T 15 20 27500 380 33.2 5.20 2860 76.8 80.0 81.8 0.65 0.77 0.84 50.11 1014 80
400 31.6 5.10 2880 78.3 81.3 82.5 0.64 0.76 0.83 49.76
415 31.5 5.28 2880 78.8 81.8 83.0 0.60 0.73 0.80 49.76
P6WC-185T 18.5 25 27500 380 40.9 5.12 2860 77.3 80.3 81.9 0.66 0.78 0.84 61.80 1064 90
400 39.4 5.20 2880 78.4 81.4 82.5 0.64 0.77 0.82 61.37
415 39.5 5.25 2880 78.8 81.8 83.1 0.61 0.73 0.80 61.37
P6WC-220T 22 30 27500 380 46.5 5.10 2870 78.3 81.6 83.6 0.70 0.80 0.86 73.24 1114 95
400 44.6 5.20 2890 79.2 82.8 84.0 0.66 0.77 0.85 72.73
415 45.2 5.15 2900 79.7 83.0 84.3 0.62 0.75 0.83 72.48
P6WC-260T 26 35 27500 380 56.2 5.18 2870 78.7 81.8 83.6 0.70 0.79 0.86 86.56 1154 101
400 55.4 5.20 2890 79.3 82.8 84.0 0.65 0.77 0.84 85.96
415 56.0 5.15 2900 79.79 83.1 84.3 0.62 0.75 0.82 85.66
P6WC-300T 30 40 27500 380 63.2 5.22 2890 78.9 82.8 84.5 0.71 0.80 0.87 99.18 1194 117
400 62.4 5.30 2900 80.1 83.8 85.0 0.65 0.79 0.86 98.84
415 63.8 5.32 2900 81.2 84.3 85.6 0.63 0.75 0.83 98.84
P6WC-370T 37 50 27500 380 78.5 5.53 2890 79.7 82.8 84.2 0.71 0.80 0.87 123.18 1224 128
400 77.4 5.30 2900 80.2 83.8 85.0 0.66 0.79 0.86 121.90
415 79.0 5.32 2900 81.2 84.0 85.2 0.63 0.75 0.84 121.90

Contact us

Get in touch for enquiries and offers.